Maximize screen for proper column
width/rows
Exclusively cast by: Model Car World Resin Replicas
Model Car World Resin Replicas aims to provide you
with quality resin castings, with only minor cleanup and fitting required.
Kits include instructions for chassis conversions and/or parts swapping.
Chrome parts must be painted with Alclad II Chrome, covered with Bare-Metal
Foil or sent by the builder to be plated. Small pinholes or air bubbles are
easily filled with putty. We recommend MCW's 0900 Polyester Putty. Use a
good super glue or 5 minute epoxy for assembly. For body or parts warpage,
heat the area with a hair dryer until pliable. Straighten the part while
soft and hold it under cold water to set in place. The
resin can be painted with any paint. MCW sells excellent
primer plus thousands of factory original colors for stock and race cars.
There will be new releases periodically, so check for updates. Allow 2-4
weeks for delivery. You will be promptly notified of any longer delays. We
offer limited production computer printed decals with most kits.
ORDER ITEMS FROM PAINT LIST SEPARATELY!
No phone or COD orders.
PLEASE NOTE:
MCW was not able to get the decal people to do racing decals
for our kits, so we do our own. The decals we are doing
ourselves are computer printed and are very low production. They are
available only with kits, unless listed below as decals only.
They are NOT SLIXX DECAL QUALITY. Hand done on our computer and
alps printer, quality is good and appropriate for vintage race cars.
We do the best we can to provide racing history no one else can or will.
See RESIN GALLERY for pictures of
most of our kits built for display.
CHEVROLET
DEL-58 1958 Chev. Delray 2dr. Sedan
(1/25th scale)
$34.00
(Stock body, interior, seats, hubcaps, & vac.
glass)
(Use AMT '58 Impala Ht. kit for other parts -
for 6-cyl. use AMT '51 Chev.)
OR 1958
Chev. Delray NASCAR (1/25th
scale) $37.00
(Stock body, race interior with roll cage & seat,
wheels, & vac. glass)
(Use AMT '58 Impala Ht. kit for all other parts.)
With NASCAR decals (#1 Banjo
Mathews/Speedy Thompson, #40 Rex White,
Black #87 Buck Baker, White #87 Buck/Buddy Baker,
or #32 City Motor Co.
- Specify one)
$45.00
BIS-64 1964 Chev. Biscayne 2dr. Sedan
(1/25th scale)
$37.00
(stock body, trunk lid, door panels, seats, wheels &
vacuformed glass)
(use Revell Impala Ht. kit for all other parts
needed.)
OR 1964 NASCAR Biscayne
2dr. Sedan (1/25th scale)
$37.00
(body, trunk lid, race interior w/cage, wheels
& vacuformed glass)
(use Revell Impala Ht. kit for all other parts
needed.)
With NASCAR decals (#12 Charley
Glotzbach, #16 Cecil Gordon, or
#00 Dick Guldstrand - specify one)
$45.00
BIS-69 1969 Chev. Biscayne 2dr. Sedan
(1/25th scale)
$40.00
(stock body, hood, bench seat interior, bumpers, wheels
& hubcaps)
(use AMT '70 Impala Ht. kit as donor.)
With Drag decals - Boertman
M/SA Gates Chevrolet $48.00
FORD
FAL-64ht 1964 Ford Falcon Ht.
(1/25th scale)
$38.00
(Complete car except engine - see ENG-07 or 09
in Parts)
From original AMT kit with corrected engine bay
- better build than Trumpeter
FAL-64afx 1964 Falcon Ht. Drag
Car(1/25th scale)
$40.00
(Body, drag hood, grill & bumpers, chassis,
interior, & vac. glass)
Use Revell '64 T-Bolt kit for suspension, wheels
& tires, and engine.
From original AMT kit with corrected engine bay
- easier build than Trumpeter
With A/FX drag decals
(not available
separately) $48.00
(specify
Dick Brannan or Phil Bonner)
FAL-64sd 1964 Falcon 2dr. Sedan - base model
(1/25th scale)
$38.00
(Complete car except engine - see ENG-07 or 09
in Parts)
From original AMT kit with corrected engine bay
- better build than Trumpeter
FAL-64wg 1964 Falcon 4dr. Wagon - base model
(1/25th scale)
$40.00
(Complete car except engine - see ENG-07 or 09
in Parts)
From original AMT kit with corrected engine bay
- better build than Trumpeter
MERCURY
COM-64 1964 Comet 2dr. Ht.
(1/25th scale)
With Drag decals (NEW - Wally
Bell) $42.00
PONTIAC
PON-58 1958 Pontiac Chieftain 2dr. Ht./Sedan
(1/25th scale)
$55.00
Stock - With open hood - use Revell '58 Impala kit
(Stock body, hood, bumpers & grill, interior,
chassis, engine parts, hubcaps,
& vac. glass)
OR 1958 NASCAR Pontiac
2dr. Sedan (1/25th scale)
$60.00
With open hood - use Revell '58 Impala
kit
(Stock body, hood, bumpers & grill, race interior
with roll cage, chassis,
engine parts, wheels, &
vac. glass)
With NASCAR
decals - #3 Paul Goldsmith, #6 Cotton Owens,
or #47 Jack Smith (specify
one)
$68.00
OR Arnie Beswick's 1958
Chieftain Drag Car (1/25th
scale) $68.00
With open hood - use Revell '58 Impala
kit
(Body, stock & louvered hood, bumpers,
stock & tube grill, interior, chassis,
engine parts, wheels,
slicks, & vac. glass)
Also includes S/S & C/G
decals with flames.
ENGINE
ENG-10 Chevy Small Block Street
Rod Headers (1/25th
scale) $3.50
(over the frame - from Grant
King sprint car)
ENG-11 Chevy Small Block Gasser
Headers (1/25th
scale) $3.50
(over the frame fenderwell exit
with dump tubes - '55-'57 Chevy, etc.)
ENG-12 Two '50's NASCAR Air
Cleaners (1/25th scale)
$3.50
(Dry type air filter & Purolator
decals - paint red)
INTERIOR
INT-08 '63 Lightweight Ford
Interior (1/25th scale)
$13.00
(Tub w/correct 500 trim, no console,
radio delete dash, and lightweight
buckets) For AMT '63 XL Ht. kit
- drag hardtops were not XL's
1963 Galaxie Drag decals - Ed Martin
Ford A/SA; or
Al Joniec Peanuts S/S; or Tasca Ford
S/S - $8.00 ea. car
Bridenthal Ford S/S & Little Wed
Wat D/S - $10.00 both cars
Mikey Thompson 997S/S & 644L/P
Hemi Ford - $10.00 both cars
INT-09 Convertible Tonneau
Cover (1/25th scale)
$3.50
(1950's NASCAR or customs)
DECALS ONLY:
(1/25th scale)
#34 Westmoreland/Alamance Motors - '56 Chev.
Conv. $10.00
(driven by Gwyn
Staley)
1964 Jake
King Thunderbolt - does either white or lt.
blue car $8.00
Also
in 1/18th scale (white car
only) $12.00 Limit two per customer
(For
personal use only - not to be resold on diecast models.)
1964
Thunderbolt 1/18th scale (Burgundy
car) $12.00 Limit two ea.
per
customer (For personal use only -
not to be resold on diecast models.)
Specify - Phil Bonner; Downtown Ford;
Butch Leal; Romy Hammes Ford;
or Tasca Ford
PLEASE NOTE:
MCW was not able to get the decal people to do racing decals
for our kits, so we do our own. The decals we are doing
ourselves are computer printed and are very low production. They are
available only with kits, unless listed above as decals only.
They are NOT SLIXX DECAL QUALITY. Hand done on our computer and
alps printer, quality is good and appropriate for vintage race cars.
We do the best we can to provide racing history no one else can or will.
See RESIN GALLERY for pictures of
most of our kits built for display.
|
