MCW Automotive Finishes

MCW Automotive Finishes, Burlington, NC, USA

Part No.     Item Name ..........................Price                                                

Catalog

paint button resin button

New Stuff

paint button resin button

Order Form

paint button resin button

e-mail
Questions Only
(read info first please)

send e-mail


Gallery


Maximize screen for proper column width/rows

Exclusively cast by: Model Car World Resin Replicas  

No phone, COD, or PayPal orders. Site is not secure for online ordering.  Click on the red button for Resin Order Form and print the page.  Then fax or mail the completed form to the me.  Shipping and credit card info is on the order form.

Model Car World Resin Replicas aims to provide you with quality resin castings, with only minor cleanup and fitting required. Kits include instructions for chassis conversions and/or parts swapping where needed. Chrome parts must be painted with Alclad II Chrome, covered with Bare-Metal Foil or sent by the builder to be plated. Small pinholes or air bubbles are easily filled with putty. We recommend MCW's 0900 Polyester Putty. Use a good super glue or 5 minute epoxy for assembly. For body or parts warpage, heat the area with a hair dryer until pliable. Straighten the part while soft and hold it under cold water to set in place. The resin can be painted with any paint. MCW sells excellent primer plus thousands of factory original colors for stock and race cars. There will be new releases periodically, so check for updates. Allow 2-4 weeks for delivery. You will be promptly notified of any longer delays. We offer limited production computer printed decals with most kits.

ORDER ITEMS FROM PAINT LIST SEPARATELY!
No phone or COD orders.

PLEASE NOTE:

Check availability before ordering decals - all three of our Alps printers are broken.
Therefore, out-of-stock decals can't be reprinted.  All are while supply lasts.   
 
See RESIN GALLERY for pictures of most of our kits built for display.

ACCESSORIES (OK to order these items on resin order form with resin order.)

MCW-A  Alclad II Chrome Paint     $8.50ea./1 oz. bottle
     
(Recommended for all chrome parts in our kits)
      Prep and prime parts with MCW 1004 Primer, then coat with gloss black enamel
      as a base.  Follow instructions on bottle - air brush only.

MCW-0900 Polyester Putty with Hardener   $10.00

AMC

HUD-01  Hudson Race Steel Wheels & Exhaust Pipes (1/25th scale)  $5.00
          (Set of 4 wheels - from Moebius/Model King '52 race car kit)

HUD-decal
  1953 Hudson NASCAR Decals
(1/25th scale)  $10.00 ea.
           (Specify #1 Marshall Teague, #14 Fonty Flock, #41 Curtis Turner, 
            or #120 Dick Rathman)


HUD-54ht
  1954 Hudson Hollywood 2dr. Ht.
(1/25th scale)  $34.00
          (body, hood, grill, bumpers, dash, & vac. glass - use Moebius '53 as donor kit)
        The rear wheel opening problem with the Moebius '53 kit has been
        corrected on MCW's hardtop body.
 

HUD-54sd   1954 Hudson 2dr. Coupe (1/25th scale)  $34.00
          (body, hood, grill, bumpers, dash, race wheels & exhaust, & vac. glass -                             
           use Moebius '53  kit for all other parts)
        With NASCAR decals $44.00
           (Specify #1 Frank Mundy, #3 Dick Rathman, #6 Marshall Teague, 
            or #92 Herb Thomas)

        MCW was not aware there is a rear wheel opening problem with the                      
        Moebius '53 kit when mastering our '54.  The problem is not visable
        when the fender skirts are left on.  When they are removed the rear
        wheels are not centered in the opening. The marks Moebius cut in the
        body should be moved back. The easiest fix is to move the rear axle
        forward
. Also, the opening can moved back requiring adding to the
        lower side trim in front of the new opening.

AMB-66   1966 Ambassador 2dr. Ht.    $50.00 (1/25th scale)
          (complete car except tires, with stock interior)
        With NASCAR #44 Queen City Rambler decals   $60.00
          Also order PAR-05 (see parts) for easier race conversion.                                                 
          (decals also do #44 '64 Ford) 

CHEVROLET (See ENG-01, 06, 07, INT-01, 03, 04, 11 in parts)

CHV-51   1951 Chevy 2dr. Coupe (1/25th scale)  $22.00
       (Stock body only - use AMT '51 Fleetline fastback kit for all parts)

GAS-51   1951 Chevy 2dr. Cp. Gasser (1/25th scale)  $27.00
       (Body with molded in firewall, lift off one piece front fenders & hood, hood scoop, 
        and assorted gasser class decals.  Use AMT '51 Fleetline fastback & MPC
        flip-nose '57 Corvette kits for all other parts.)

CHE-56   1956 Chev. Bel Air 2dr. Ht. (1/25th scale)  $34.00
        (Accurate 1/25th stock body, interior, seats, & vac. rear glass)
        (Use Revell '56 Delray Sedan kit for all other parts)
      With NASCAR decals (Hardtop - #32 Brownie King; Convertible - #5 Tom
        Pistone, #33 Jim Massey, or #92 Herb Thomas, - Specify one)
  $44.00
        Convertible requires builder to cut off roof - see INT-09 & 10.

NOM-57   1957 Chev. Nomad Wagon(1/25th scale)  $34.00
        (Accurate 1/25th stock body, interior, rear bumper, gas tank/spare, & vac. rear glass)
        (Use Revell '57 Bel Air 2dr. Sedan kit for all other parts)

DEL-58   1958 Chev. Delray 2dr. Sedan (1/25th scale)  $34.00
       (Stock body, interior, seats, hubcaps, & vac. glass)
       (Use AMT '58 Impala Ht. kit for other parts - for 6-cyl. use AMT '51 Chev.)
OR 1958 Chev. Delray NASCAR (1/25th scale)  $37.00
      (Stock body, race interior with roll cage & seat, wheels, & vac. glass)
      (Use AMT '58 Impala Ht. kit for all other parts.)
      With NASCAR decals (#1 Banjo Mathews/Speedy Thompson, #40 Rex White,
        Black #87 Buck Baker, White #87 Buck/Buddy Baker, or #32 City Motor Co.
        - Specify one)
  $45.00

BIS-61   1961 Chev. Biscayne 2dr. Sedan (1/25th scale)    $34.00
      (stock body, interior tub, seats, & vacuformed rear glass)
      (use Lindberg Impala Ht. kit for all other parts needed)
      S/S Drag Car - with Dave Strickler  decals   $44.00

BIS-62   1962 Chev. Biscayne 2dr. Sedan (1/25th scale)  $34.00
      (stock body, interior tub, seats, & vacuformed glass)
      (use AMT Bel Air Ht. kit for all other parts needed)
      S/S Drag Car - with decals   $44.00
        (specify Hubert Platt/"Fugitive" or Butch Leal/Tom Jacobson - both 2 cars ea.)

CVT-62   1962 Chevy Boys Corvette Drag Car (1/25th scale)  $15.00
      (Decals, hood scoop, & front Sears Mags only.  Use AMT '62 Vette & MPC
       '57 Flip-nose Vette for all other parts.)

IMP-62   1962 Chev. Impala SS 2dr. Ht. -  Use with Revell kit
      
(See ENG-08 & INT-04 in parts section)
      Drag decals only
        Dave Strickler B/FX,  Don Nicholson/Hubert Platt B/FX,
        or Ronnie Sox B/FX - 1 car ea.,    $10.00 ea.

NOV-62wg   1962 Chevy II 100 Station Wagon(1/25th scale)  $45.00
      (stock body, hood, bumpers, interior, chassis, wheels, tires, & vac. glass)
      ( For 6 cylinder engine see ENG-01 in parts section - extra cost)
      With Drag decals - Dyno Don Nicholson B/FX   $53.00

BIS-63   1963 Chev. Biscayne 2dr. Sedan (1/25th scale)  $37.00
      (stock body, trunk lid, interior tub, seats, wheels & vacuformed glass)
      (use Revell Impala Ht. kit for all other parts needed.  AMT can be used with
       with modifications on instructions)
      B/MP Drag Car - with "The Wild One" decals   $45.00

NOV-63   1963 Chevy II 100 2dr. Sedan (1/25th scale)  $25.00
      (stock body, seats, & hubcaps)
      (use Trumpeter Ht. kit for all other parts needed)

NOV-63fc   1963 Chevy II 2dr. Sedan  Funny Car (1/25th scale)  $25.00
      (altered wheelbase body, hood, grill, bumpers, & front wheels)
      (use AMT Rat Packer kit for all other parts needed.  For Slixx Decals Doug's                 
       Headers car.)

NOV-63wg   1963 Chevy II 400 Station Wagon(1/25th scale)  $45.00
      (stock body, hood, bumpers, interior, chassis, wheels, tires, & vac. glass)
      ( For 6 cylinder engine see ENG-01 in parts section - extra cost)

BIS-64   1964 Chev. Biscayne 2dr. Sedan (1/25th scale)  $37.00
      (stock body, trunk lid, door panels, seats, wheels & vacuformed glass)
      (use Revell Impala Ht. kit for all other parts needed.)
OR 1964 NASCAR Biscayne 2dr. Sedan  (1/25th scale)  $37.00
      (body, trunk lid, race interior w/cage, wheels & vacuformed glass)
      (use Revell Impala Ht. kit for all other parts needed.)
      With NASCAR decals (#12 Charley Glotzbach, #16 Cecil Gordon, or
        #00 Dick Guldstrand - specify one)
  $45.00

CHE-64ht  1964 Chevelle Malibu Ht. - not SS (1/25th scale)  $38.00
      (regular Malibu body w/center side chrome, open hood, bench seat interior,
      bumpers, & wheel covers) (Use Revell '65 Chevelle SS Ht. kit for donor)
      With Drag decals -  $46.00
        Specify Dick Harrell, Malcom Durham, Huston Platt, or Tom Sturm 

CHE-64sd  1964 Chevelle 300 2dr. Sedan (1/25th scale)  $38.00
      (stock body, open hood, bench seat interior, bumpers, wheels & hubcaps)
      (Use AMT '65 Chevelle SS Ht. kit for donor.  See ENG-01)
      With Drag decals -  $46.00
        Specify Jack May, or Wally Bell

CHE-64wg  1964 Chevelle 300 2dr. Wagon (1/25th scale)  $38.00
      (stock body, open hood, interior, bumpers, wheels & hubcaps)  
      (Use AMT '65 Malibu 4dr. Wagon kit for donor.  See ENG-01) 

NOV-64awb   1964 Chevy II A/FX AWB Fastback(1/25th scale)  $27.00
      (AWB body, hood & scoop, bumpers, grill, headlights & tailights)
      (use AMT Rat Packer kit for all other parts needed - instructions included)
      With Drag decals - CKC Racing  $35.00

NOV-64fc   1964 Chevy II Fastback Longnose F/C(1/25th scale)  $34.00
      (extended AWB body, chassis, hood, grill, headlights & tailights)
      (use AMT Rat Packer kit for all other parts needed - instructions included)
      With Drag decals - Super II Alcohol Funny Car $42.00

NOV-64swb   1964 Chevy II A/FX/Roadrace Fastback(1/25th scale)  $25.00
      (stock wheelbase body, hood scoop, racing seats, gauges, & steering wheel)
      (use Trumpeter '63 Nova kit for all other parts needed - instructions included)
      With Drag decals -  $33.00
        Specify SWB Alan Green Chev.(different than AWB car) or CKC Racing

BIS-65   1965 Chev. Biscayne 2dr. Sedan (1/25th scale)  $40.00
      (stock body, hood, int.tub, seats, grill, rear bumper, wheels & vac. rear glass)
      (use Monogram Impala Ht. kit for all other parts needed.)

CHE-65awb  1965 AWB Chevelle Malibu 2dr. Ht. (1/25th scale)  $55.00
      (Complete kit except tires - based on Revell '65 Malibu not bogus AMT AWB kit)
      (Body, hood, grill & bumpers, interior & cage, chassis & suspension, injected
       engine, wheels, & vacuformed glass)
      Drag decals - Seaton's Shaker or Tom Sturm  $10.00
        Malcom Durham (2 cars - also does '66 Corvair)  $12.00

CHE-65sd  1965 Chevelle 300 2dr. Sedan (1/25th scale)  $34.00
      (stock body, bench seat interior, bumpers, wheels & hubcaps)  
      (Use Revell '65 Chevelle SS Ht. kit for donor.  See ENG-01)

CHE-65wg  1965 Chevelle 300 2dr. Wagon (1/25th scale)  $24.00
      (stock body & hubcaps only)  
      (Use AMT '65 Malibu 4dr. Wagon kit for donor.  See ENG-01)
      With Drag decals - War Wagon (fantasy match race)  $32.00

NOV-65   1965 Chevy II 100 2dr. Sedan (1/25th scale)  $27.00
      (stock body, grill, hood, trunk, seats, & hubcaps)
      (use Trumpeter '63 Chevy II Ht. kit for all other parts needed)

NOV-65awb   1965 Chevy II A/FX AWB Fastback(1/25th scale)  $22.00
      (body, hood scoop, & tailights)
      (use AMT Rat Packer kit for all other parts needed - instructions included)
      With Drag decals -   $30.00
       Specify CKC Racing or Huston Platt Dixie Twister

NOV-65ht  1965 Chevy II Ht. Stock WB  Match Race(1/25th scale) $47.00
      (A/FX body, grill, tailights, interior tub, chassis, headers & hood scoop)
      (use AMT Rat Packer kit for all other parts needed - instructions included)
       Dick Harrell Decals included in price - all red car (black version was '64)

BIS-66   1966 Chev. Biscayne 2dr. Sedan (1/25th scale)  $40.00
      (body, hood, interior, seats, grill & bumpers, wheels & hubcaps, & vac. glass)
      (use Monogram '65 Impala Ht. kit for donor - AMT '67 will work with mods.)
      With Drag decals -  $48.00
        Specify Kicks, or Secret Storm A/S 427's 

CHE-66awb  1966 AWB Chevelle Malibu 2dr. Ht. (1/25th scale)  $55.00
      (Complete kit except tires - based on Revell '65/'67 Malibu not AMT AWB kit)
      (Body, hood, grill & bumpers, interior & cage, chassis & suspension, injected
       engine, wheels, vacuformed glass, & reference Seaton's Shaker magazine article)
      Drag decals - Seaton's Shaker  $10.00

CHE-66  1966 Chevelle 300 2dr. Sedan (1/25th scale)  $37.00
      (stock body, hood, seats, grill, bumpers, wheels & hubcaps, & vac. glass)
      (use Lindberg '66 Chevelle Super Sport kit for all other parts)

COR-66awb   1966 (early) AWB Corvair F/C (1/25th scale)  $27.00
      Slightly lengthened body in front with rear & front wheels moved forward.
      Engine is in front of firewall with open lengthened hood.
 Later was longnose.
      (body, hood, bumpers, & Malcom Durham reference magazine article)
      (use AMT Rat Packer kit - requires heavy chassis & interior modifications)
      Drag decals - Malcom Durham (2 cars - also does '65 Chevelle)  $12.00

COR-66swb   1966 Stretched WB Corvair F/C (1/25th scale)  $27.00
      Stock length body with only front wheels moved forward.
      Mid-engine is behind the windshield with hood molded in.

      (body w/molded hood, bumpers, & Seaton Shaker reference magazine article)
      (use AMT Rat Packer kit - requires heavy chassis & interior modifications)
      Drag decals - Seaton's Shaker or Hayden Proffitt  $10.00

NOV-66  1966 Chevy II 100 2dr. Sedan (1/25th scale) $27.00
       (stock body, grill, seats, wheels & hubcaps)
       (use AMT '66 Nova SS Ht. kit for all other parts.  See ENG-01)

BIS-67   1967 Chev. Biscayne 2dr. Sedan (1/25th scale)  $40.00
      (stock body, hood, int.tub, seats, grill, rear bumper, wheels & vac. rear glass)
      (use AMT '67 Impala Ht. kit for all other parts needed.)

CHE-67  1967 Chevelle 300 2dr. Sedan (1/25th scale)  $37.00
      (stock body, hood, seats, grill, rear bumper, wheels & hubcaps, & vac. glass)
      (use Revell '67 Chevelle SS kit for donor - AMT '67 will work with mods.)

BIS-68   1968 Chev. Biscayne 2dr. Sedan (1/25th scale)  $40.00
      (stock body, hood, interior & seats, grill & bumpers, wheels & vac. rear glass)
      (use AMT '67 Impala Ht. kit for all other parts needed.)

IMP-68   1968 Chev. Impala SS Ht. (1/25th scale)  $40.00
      (stock body, hood, interior & seats, grill & bumpers, & wheel covers)
      (use AMT '67 Impala Ht. kit for all other parts needed.)

BIS-69   1969 Chev. Biscayne 2dr. Sedan (1/25th scale)  $40.00
      (stock body, hood, bench seat interior, bumpers, wheels & hubcaps)
      (use AMT '70 Impala Ht. kit as donor.)
      With Drag decals - Boertman M/SA Gates Chevrolet  $48.00

IMP-69cc   1969 Chev. Impala SS Custom Ht. (1/25th scale)  $40.00
      (formal roof body, hood, interior & seats, bumpers, wheel covers
       & rally wheels) (use AMT '70 Impala Ht. kit for all other parts needed.)

IMP-69sc   1969 Chev. Impala SS Sport Coupe (1/25th scale)  $40.00
      (sloped roof body, hood, interior & seats, bumpers, wheel covers
       & rally wheels) (use AMT '70 Impala Ht. kit for all other parts needed.)

DODGE  (See ENG-02, 03, 04, INT-05, 07, & WH-11 in parts)

DOD-60ht   1960 Dodge Dart 2dr. Ht. (1/25th scale)   $37.00
      (Stock body w/open hood, bumpers, interior, ram induction, wheel covers, & 
       vac. glass.  Use AMT '58 Plymouth chassis and engine.)

DOD-62ht   1962 Dodge Dart 440 2dr. Ht. (1/25th scale)   $42.00
      (Stock body, hood, bumpers, interior, chassis, & vac. glass.)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals (specify Bud Faubel, Garlits' Dodge, or Maverick)  $50.00

DOD-62sd   1962 Dodge Dart 2dr. Sedan (1/25th scale)   $42.00
      (Stock body, hood, bumpers, interior, chassis, & vac. glass.)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals      $50.00
         (specify - Motor Trend, Ramchargers, Stanford Bros. - Al Eckstrand,
          or Thomas Dodge - Marvin Ford)

DOD-63ht   1963 Dodge Polara 2dr. Ht. (1/25th scale)   $42.00
      (Stock body, hood, bumpers, interior, chassis, & vac. glass.)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals (specify Bounty Hunters or The Honker)  $50.00

DOD-63sd   1963 Dodge 330 2dr. Sedan (1/25th scale)   $42.00
      (Stock body, hood, bumpers, interior, chassis, & vac. glass.)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals      $50.00
         (specify - Lawman, Maverick, Motor Trend or
          Ramchargers-use with '64 kit decals to covert to '63 car)

DOD-65htfc   1965 AWB Dodge Ht. Funny Car  (1/25th scale)   $45.00
      (body, hood, grill & bumpers, chassis, interior, fuel injection, & vac. glass)
      Use Lindberg '64 Ramchargers Dodge for all other parts needed.
      With Drag decals     $53.00
         (specify - Harrop's Flying Carpet (early) or (late), The Honker, Dave
           Strickler, or Studio Dodge)

DOD-65sd   1965 Dodge Coronet 2dr. Sedan (1/25th scale)   $32.00
      (Stock body, hood, bumpers, grills, & vac. glass.  Use Lindberg '64 Dodge
       or Polar Lights '65 Coronet for engine, interior, & chassis.)
      With Drag decals   $40.00
       
(specify Bounty Hunters, Harrop's Flying Carpet, or Original Depenable,)

DOD-65sdfc   1965 AWB Dodge 2dr. Sedan Funny Car  (1/25th scale)   $45.00
      (body, hood, grill & bumpers, chassis, interior, fuel injection, & vac. glass)
      Use Lindberg '64 Ramchargers Dodge for all other parts needed.
      With Drag decals     $53.00
         (specify - Charlie Allen, Hemi Rebel Rouser, Shirl Greer's Tension,
          or Yankee Peddler)

DOD-66sd   1966 Dodge Coronet 2dr. Sedan (1/25th scale)   $40.00
      (body, hood, bumpers & grill, bench seat int., wheels & hubcaps, & vac. glass)
      Use Revell '67 Coronet R/T Ht. kit for all other parts.
      With Drag decals - Chicagoland Dodge Boys    $48.00

FORD  (See ENG-07, 09, & INT-03, 08 in parts)

FRL-62sd   1962 Ford Fairlane 2dr. Sedan  (1/25th scale)  $38.00  
       (stock body, hood, bumpers & grill, interior & vacuformed glass)
       Use Revell '64 Fairlane kit for chassis, wheels & tires, and engine.
       (see ENG-07 for 221/260 small block or ENG-09 for 6-cyl.)

FRL-62afx   1962 A/FX Fairlane Drag Car   (1/25th scale)  $38.00  
       (stock body, hood, bumpers & grill, 406 eng. parts, & vac. glass)
       Use Revell '64 T-Bolt kit for chassis, interior, wheels & tires, and engine.
       Price includes Tasca Ford drag decals

GAL-62ht   1962 Ford Galaxie 500 2dr. Ht.  (1/25th scale)   $45.00
       (stock body, bumpers, hood, interior & vacuformed glass)
       Use AMT '60 Ford kit for chassis, wheels & tires, and engine.
    With Drag decals    $53.00
       (specify red Phil Bonner, black Gas Ronda, or white Jake King* car)

         * Jake King later became Sox & Martin's chief mechanic

GAL-62sd   1962 Ford Galaxie 2dr. Sedan  (1/25th scale)  $45.00  
       (stock body, bumpers, hood, interior & vacuformed glass)
       Use AMT '60 Ford kit for chassis, wheels & tires, and engine.
    With Drag decals    $53.00 
       (specify - Al Means Ford, Les Ritchey/Gas Ronda (both cars), Bruce Larson,
        Tasca Ford; or choose either lt. blue A/FX or dk. blue SS/S Dick Brannan)

    With NASCAR interior & decals    $53.00 
       (specify #29 Nelson Stacey red or yellow car, #28 Fred Lorenzen/#0
        Dan Gurney, #66 Larry Frank, or #21 Wood Bros.)

FRL-63sd   1963 Ford Fairlane 2dr. Sedan  (1/25th scale)  $38.00  
       (stock body, hood, bumpers & grill, interior & vacuformed glass)
       Use Revell '64 Fairlane kit for chassis, wheels & tires, and engine.
       (see ENG-07 for 221/260 small block or ENG-09 for 6-cyl.)

FRL-63ht   1963 Ford Fairlane 500 Sports Coupe  (1/25th scale)  $40.00  
       (body, stock & drag hoods, bumpers & grill, interior, wheel covers, & vac. glass)
       Use Revell '64 Fairlane T-Bolt kit for chassis, wheels & tires, and engine.
       (see ENG-07 for 260/289 small block conversion)

FAL-64ht   1964 Ford Falcon Ht.  (1/25th scale)  $38.00  
       (Complete car except engine - see ENG-07 or 09 in Parts)
       From original AMT kit with corrected engine bay - better build than Trumpeter

FAL-64afx   1964 Falcon Ht. Drag Car(1/25th scale)  $40.00  
       (Body, drag hood, grill & bumpers, chassis, interior, & vac. glass)
       Use Revell '64 T-Bolt kit for suspension, wheels & tires, and engine.
       From original AMT kit with corrected engine bay - easier build than Trumpeter
    With A/FX drag decals  (not available separately)   $48.00
       
(specify Dick Brannan or Phil Bonner)

FAL-64sd   1964 Falcon 2dr. Sedan - base model (1/25th scale)  $38.00  
       (Complete car except engine - see ENG-07 or 09 in Parts)
       From original AMT kit with corrected engine bay - better build than Trumpeter

FAL-64wg   1964 Falcon 4dr. Wagon - base model (1/25th scale)  $40.00  
       (Complete car except engine - see ENG-07 or 09 in Parts)
       From original AMT kit with corrected engine bay - better build than Trumpeter

FRL-64ht   1964 Ford Fairlane 500 Ht.  (1/25th scale)  $32.00  
       (body, bench seat, 289 engine conversion, & vacuformed glass)
       Use Revell '64 Fairlane T-Bolt kit for all other parts.
    With D/S drag decals    $40.00
       
(specify The Ford Boys or Frank Johnson)

FRL-65sd   1965 Ford Fairlane 2dr. Sedan  (1/25th scale)  $38.00  
       (stock body, hood, bumpers & grill, interior & hubcaps)
       Use Revell '64 Fairlane kit for chassis, wheels & tires, and engine.
       (see ENG-07 for 221/260 small block or ENG-09 for 6-cyl.)

FRL-65ht   1965 Ford Fairlane 500 Sports Coupe  (1/25th scale)  $40.00  
       (body, stock & drag hoods, bumpers & grill, interior, wheel covers, & vac. glass)
       Use Revell '64 Fairlane T-Bolt kit for chassis, wheels & tires, and engine.
       (see ENG-07 for 289 small block conversion)
    With Drag decals (two '65 Thunderbolts were made)   $48.00
       
(specify Paul Harvey Ford E/XS or Darrel Droke's B/FX Downey Ford)

MUS-66fc   1966 Ford Mustang SOHC 427 Longnose Funny/Car (1/25th) $34.00
      (body with extended front end, hood, chassis, and vacuformed glass)
      (Use AMT/Model King AWB Mustang kit for donor.)
    With Drag decals    $42.00
       
(specify - Gas Ronda - 1 car; Tasca Ford  - does 2 versions; or
        Tom Grove/Hubert Platt - does both cars)

TOR-76   1976 Limited Edition Gran Torino 
      (Discontinued - Revell is doing a plastic kit.)

MERCURY  (see ENG-07, 09, & PAR-04 in Parts)

COM-64   1964 Comet 2dr. Ht. (1/25th scale)  $34.00
      (With open hood & engine bay)
      (body, stock hood, teardrop & twin flat scoop hoods, firewall, radiator, and chassis)
      Use AMT/Model King '64 Comet for bumpers, interior, and glass.  See ENG-07 for            
      221/260 small block or ENG-09 for 6-cyl.
    With Drag decals     $42.00 (Use Revell T-Bolt engine)
       (specify  - Wally Bell; Sox & Martin all white or red, white, & blue;
        Sachs & Sons; or Doug Nash B/FX)

COM-64wg   1964 Comet Wagon (1/25th scale)  $45.00
      (body, stock & A/FX hoods, grill & bumpers, interior, chassis, & vac. glass)
      Stock or A/FX - use Revell '64 T-bolt (see ENG-07 for 221/260 small block or                
      ENG-09 for 6-cyl.)
    With Drag decals     $53.00
       (specify  - Don Nicholson or Ed Schartman - car was given to Schartman with
        different graphics when Nicholson got a hardtop)

COM-65   1965 Comet 2dr. Ht. (1/25th scale)  
      (Discontinued - Moebius is doing a plastic kit.)
    Drag decals     $10.00
       (specify - Arnie Beswick, Ed Schartman)

COM-65fc   1965 Comet AWB Funny Car (1/25th scale)  $37.00
      (With open hood)
      (body, twin flat scoop hood, bumpers, grill, and chassis)
      Use AMT/Model King '65 AWB Falcon for engine, suspension, interior, and glass.
       (Slixx has Hayden Proffitt and Dyno Don decals for this body)
    With Drag decals - Jack Chrisman     $45.00
       (requires rear wheel well, chassis, and engine modifications)

OLDS

OLD-50fb   1950 Olds 88 Fastback Sedan  (1/25th scale)   $27.00
      (stock body, rear window deck, & vacuformed glass)
      (Use Revell '50 Olds Club Coupe kit as donor)

OLD-50ht   1950 Olds 88 Holiday Ht. (1/25th scale)   $27.00
      (stock body, rear window deck, & vacuformed glass)
      (Use Revell '50 Olds Club Coupe kit as donor)

OLD-50sd   1950 Olds 88 2dr. Sedan (1/25th scale)   $24.00
      (stock body & rear window deck) (Not short roof coupe - correct for #52)
      (Use Revell '50 Olds Club Coupe kit as donor)

OLD-52ht   1951-52 Olds 88 2dr. Ht. (1/25th scale)   $55.00 (Complete kit)
      (stock body, chassis, engine, interior, tires & wheels, & vacuformed glass)
    Convertible Conversion (boot & sun visors - reqs. cutting roof off Ht.)   $ 6.00

OLD-52sd   1951-52 Olds 88 2dr. Sedan (1/25th scale)  $55.00 (Complete kit)
      (stock body, chassis, engine, interior, tires & wheels, & vacuformed glass)
    With NASCAR decals (#2 Bill Blair)   $63.00     

OLD-53ht   1953 Olds 88 2dr. Ht. (1/25th scale)   $55.00 (Complete kit)
      (stock body, chassis, engine, interior, tires & wheels, & vacuformed glass)
    Convertible Conversion (boot & sun visors - reqs. cutting roof off Ht.)   $ 6.00

OLD-53sd   1953 Olds 88 2dr. Sedan  (1/25th scale)  $55.00 (Complete kit)
      (stock body, chassis, engine, interior, tires & wheels, & vacuformed glass)
    With NASCAR decals  (#2 Bill Blair)   $63.00

OLD-55ht   1955 Olds Super 88 Holiday 2dr. Ht.  (1/25th scale)  $60.00 (Complete kit)
      (stock body, chassis, engine, interior, tires & wheels, & vacuformed glass)

OLD-55sd   1955 Olds 88 2dr. Sedan  (1/25th scale)  $60.00 (Complete kit)
      (stock body, chassis, engine, interior, tires & wheels, & vacuformed glass)
    With Hyway Patrol TV show decals    $63.00
    With NASCAR decals     $68.00
      (specify #55 Junior Johnson, or #14 Fonty Flock)

PLYMOUTH  (See ENG-02, 03, 04, INT-05, 07, & WH-11 in parts)

PLY-62ht   1962 Plymouth Fury 2dr. Ht. (1/25th scale)   $42.00
      (Stock body, hood, bumpers, interior, chassis, & vac. glass.)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals     $50.00
         (specify - Blair's Speed Shop, Hot Rod Magazine, Doug Kahl D/SA,
          or Milne Bros.)

PLY-62sd   1962 Plymouth Savoy 2dr. Sedan (1/25th scale)   $42.00
      (Stock body, hood, bumpers, interior, chassis, & vac. glass.)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals      $50.00
         (specify - The Joker AA/M or Melrose Missile)

PLY-63sd   1963 Plymouth Savoy 2dr. Sedan (1/25th scale)   $40.00
      (Stock body, hood & scoop, grill & bumpers, chassis, dash, & vac. glass)
      Use Lindberg '64 Dodge kit for interior, suspension parts & running gear,
        engine, & wheels.
      With Drag decals     $48.00
         (specify - Color Me Gone, or Hayden Proffitt)
       1963 Plymouth Belvedere Ht. drag decals only     $10.00
          (Ritchie & Ritchie Flying A car, and two versions of Bruce Morgan's
           Yeakel Plymouth - does all three cars)

          For hardtop use original JoHan Fury Ht. kit or modify our 2dr. sedan into a
            hardtop and use Lindberg '64 Plymouth kit interior.

PLY-64ht   1964 Plymouth Fury 2dr. Ht. (1/25th scale)   $45.00
      (Original JoHan - complete car less engine, wheels & tires)
      Use Lindberg '64 Dodge/Plymouth or Polar Lights '65 Coronet for engine.
      With Drag decals (Golden Commando)    $53.00        

PLY-64sd   1964 Plymouth A990 2dr. Sedan (1/25th scale)   $40.00
      (Stock body, hood, grills, bumpers, chassis, & vac. glass)
      Use Lindberg '64 Dodge kit for interior, suspension parts & running gear,
        engine, & wheels.
      With Drag decals (Golden Commando)    $48.00

BAR-65  1965 Barracuda stock version  (1/25th scale)  $37.00
      (stock body, hood, grill, tailights, bumpers, interior, wheels & tires, & vac. glass)
      Use AMT '69 Cuda for chassis - recommend AMT '75 Duster for 273 engine.
      With F/SA Drag decals     $45.00
         (specify - Golden Commando or Brand X Eliminator)

BAR-65fc   1965 Barracuda AWB Funny Car  (1/25th scale)  $42.00
      (body, hoods, grills, tailights, bumpers, chassis, int. tub & cage, fuel
       injection, & 2-4 short ram intake and carbs.) (Correct for Petty car)
      Use AMT/Model King Hemi Under Glass kit for all other parts needed.  

BAR-65re   1965 Barracuda Rear Engined Funny Car  (1/25th scale)  $27.00
      (stock body, hood, grill, tailights, & bumpers)
      (use AMT/Model King Hemi Under Glass kit for all other parts needed.  Slixx
       Decals has Plymouth Dealers decals for this car.  For '65 Hemi Under Glass
       use kit decals.)

PLY-65ht   1965 Plymouth Satellite 2dr. Ht. (1/25th scale)   $40.00
      (Stock or A990)
      (body, hood, grill & bumper, interior, hemi parts, & vac. glass)
      Use Model King/Lindberg '64 Plymouth kit for chassis, engine, & wheels.
      With Drag decals     $48.00
         (specify - Golden Commandos or Melrose Missile - the only two
           factory A990 hardtops)

PLY-65htfc   1965 AWB Plymouth Ht. Funny Car  (1/25th scale)   $45.00
      (body, hood, grill & bumpers, chassis, interior, fuel injection, & vac. glass)
      Use Lindberg '64 Ramchargers Dodge for all other parts needed.
      With Drag decals     $53.00
         (specify - California Flash, Golden Commandos, Melrose Missile, or
          Maloney Plymouth Flintstone Flyer Cracker)

PLY-65sd   1965 Plymouth 2dr. Sedan (1/25th scale)   $40.00
      (Stock Belvedere I or A990)
      (body, hood, grill, bumpers, chassis, & vac. glass)
      Use Lindberg '64 Dodge kit for interior, suspension parts & running gear,
        engine, & wheels.
      With Drag decals     $48.00
         (specify - California Flash, Drag-On-Lady, Maloney Motors, Herb McCandless,               
          or Mr. 5 & 50)  Slixx has Sox & Martin decals.


PLY-65sdfc   1965 AWB Plymouth 2dr. Sedan Funny Car  (1/25th scale)   $45.00
      (body, hood, grill & bumpers, chassis, interior, fuel injection, & vac. glass)
      Use Lindberg '64 Ramchargers Dodge for all other parts needed.
      With Drag decals     $53.00
         (specify - UFO or Jake's Speed Equipment)  Slixx has Sox & Martin decals.

BAR-66  1966 Barracuda stock version  (1/25th scale)  $37.00
      (stock body, hood, grill, tailights, bumpers, interior, wheels & tires, & vac. glass)
      Use AMT '69 Cuda for chassis - recommend AMT '75 Duster for 273 engine.

BAR-66fc   1966 Barracuda AWB Funny Car  (1/25th scale)  $37.00
      (stock length AWB body, hood, chassis, interior tub, cage, & fuel injection)
      (To convert to front engine car - use AMT/Model King Hemi Under Glass kit.)
   With Drag decals   $45.00
      (specify - Kingfish, Skootin Cuda, or Sox & Martin)

BAR-66lnfc   1966 Longnose Cuda AWB Funny Car  (1/25th scale)  $40.00
      (extended AWB body, hood, chassis, interior tub, cage, & fuel injection)
      (To convert to front engine car - use AMT/Model King Hemi Under Glass kit.)
   With Drag decals   $48.00
      (specify - Kingfish or Sox & Martin)

PLY-66sd   1966 Plymouth Belvedere I 2dr. Sedan (1/25th scale)   $40.00
      (body, bumpers & grill, bench seat interior, wheels & hubcaps, & vac. glass)
      Use Revell '67 Plymouth GTX kit for all other parts.
      With Drag decals     $48.00
         (specify - Brand X Eliminator A/SA, Don Grotheer or Jere Stahl A/S,
           or Judy Lilly SS/B)


DUS-73   1973/74 Duster Pro Stock 2dr.  (1/25th scale)  $34.00
      (stock body, race interior w/cage, hood & scoop, grill, tailights, & bumpers)
      (use AMT '75 Duster - really a Dodge Sport -  kit for engine, chassis & glass.  Slixx
       Decals has Sox & Martin and Fred Cady has Mopar Missile decals for this car.)

PONTIAC (See WH-03 in Parts)

PON-56sd   1956 Pontiac 860 2dr. Sedan   (1/25th scale)  $50.00(Complete kit)
      (Stock body, bumpers, interior, detailed promo style chassis, w/w tires & wheels,
        & vacuformed glass. Hood molded closed.)
      NASCAR - #55 Junior Johnson decals    $60.00

PON-58  1958 Pontiac Chieftain 2dr. Ht./Sedan  (1/25th scale)  $55.00
    Stock - With open hood - use Revell '58 Impala kit
      (Stock body, hood, bumpers & grill, interior, chassis, engine parts, hubcaps,
        & vac. glass)
OR 1958 NASCAR Pontiac 2dr. Sedan  (1/25th scale)  $60.00
         With open hood - use Revell '58 Impala kit
      (Stock body, hood, bumpers & grill, race interior with roll cage, chassis,                            
       engine parts, wheels, & vac. glass)
     
With NASCAR decals - #3 Paul Goldsmith, #6 Cotton Owens,
         or #47 Jack Smith (specify one)      
$68.00
OR Arnie Beswick's 1958 Chieftain Drag Car (1/25th scale)  $68.00
         With open hood - use Revell '58 Impala kit
      (Body, stock & louvered hood, bumpers, stock & tube grill, interior, chassis,                        
       engine parts, wheels, slicks, & vac. glass)  
       Also includes S/S & C/G decals with flames.

CAT-59ht   1959 Pontiac Catalina Ht.  (1/25th scale)  $50.00
    Complete car - specify stock or NASCAR interior
      (except wheels & tires - hood molded closed)
    NASCAR - with #3 Yunick/Fireball Roberts decals    $58.00

PON-60ht   1960 Pontiac Catalina/Ventura Ht. (1/25th scale)    $50.00
    Complete car - specify stock or NASCAR interior
      
(except wheels & tires - hood molded closed)
    Drag Car - with Royal Pontiac or Arnie Beswick decals    $58.00
      (Royal specify S/SA White car or S/S Maroon car)
    NASCAR - with decals (specify #6 Cotton Owens, #20 Marvin Panch decals
     ('61 Daytona 500 winner), #22 Fireball Roberts, or #47 Jack Smith)   $58.00

CAT-61ht   1961 Pontiac Catalina Ht. (1/25th scale)
      Discontinued - Moebius is doing a plastic kit

    NASCAR Decals - #27 Junior Johnson    $10.00

CAT-61sd   1961 Pontiac Catalina 2dr. Sedan   (1/25th scale)
      Discontinued temp. - Will be newly based on Moebius plastic kit when available.

VEN-61ht   1961 Pontiac Ventura Ht. (1/25th scale)
      Discontinued - Moebius is doing a plastic kit

    Drag Car Decals - Arnie Beswick or  Royal Pontiac    $10.00

CAT-62sd   1962 Pontiac Catalina 2dr. Sedan   (1/25th scale)   $25.00
      (stock body & vacuformed glass - use with AMT Ht. kit)
    With S/S Drag Car decals   $35.00
      (Mickey Thompson/Don Gay-does 2 cars)

TEM-62cp   1962 Pontiac Tempest 2dr. 4-cylinder  (1/25th scale)  $52.00
      (complete car except tires)
    Complete 421 SD A/FX Drag Car with decals     $60.00
      (Mickey Thompson-does 3 cars, also both '63 Tempests)

CAT-63ht   1963 Pontiac Catalina Ht.  (1/25th scale)   $60.00
    Complete car - specify stock or NASCAR interior (except wheels & tires)
    NASCAR - with decals    $68.00
       
(specify #8 Joe Weatherly, #22 Fireball Roberts, or #87 Buck Baker)
    Drag Car
- with decals     $68.00
       (specify Arnie Beswick, or Arlen Vanke)

CAT-63sd   1963 Pontiac Catalina 2dr. Sedan   (1/25th scale)   $60.00
      (stock complete car with vacuformed glass - except wheels and tires)
    With B/MP Edwards Pontiac Drag Car decals   $68.00

OR 1963 PontiacCatalina 2dr. Sedan 421 SD Nostalgia Drag Car     $68.00
      (complete car - except tires, includes Warpath decals) (1/25th scale)

GP-63ht   1963 Pontiac Grand Prix Hardtop (1/25th scale)   $60.00
      (stock complete car with vacuformed glass - except tires)
      (mastered from original AMT '64 Grand Prix)

TEM-63cp   1963 Pontiac Tempest 421 SD Drag Coupe  (1/25th scale)   $55.00
      (complete A/FX car except tires)
    Complete with drag decals  (1/25th scale)   $63.00
      (specify Arnie Beswick, Arlen Vanke, - each does 1car
       or Mickey Thompson-does 3 cars, both '63's & the '62)

OR 1963 Pontiac Tempest 421 SD NASCAR Race Car  (1/25th scale)   $63.00 
     
Complete car except wheels and tires with #50 Paul Goldsmith decals  

OR
1963 Pontiac Tempest Stock 4-cyl. Coupe   (1/25th scale)  $52.00
       (complete car except tires)
       (4-cyl. & chassis from '62 Tempest - some fitting required)

TEM-63fc   1963 Pontiac Tempest Longnose Funny Car (1/25th scale)   $48.00
      (body, separate extended frontend, blown Pontiac engine, chassis, wheels, &
       Arnie Beswick Tameless Tiger decals - not available separately)
      (Use AMT/Model King Funny Farmer kit as donor - incorrect body & engine)

TEM-63wg   1963 Pontiac Tempest 421 SD Drag Wagon  (1/25th scale)   $55.00
      (complete A/FX car except tires)
    With Arnie Beswick decals  (1/25th scale)   $63.00

OR
 1963 Pontiac Tempest Stock 4-cyl. Wagon  (1/25th scale)  $52.00
       (complete car except tires)
       (4-cyl. & chassis from '62 Tempest - some fitting required)

CAT-64ht   1964 Pontiac Catalina 2dr. Hardtop (1/25th scale)   $60.00
      (stock complete car with vacuformed glass - except tires)
      (mastered from original AMT Grand Prix)

CAT-64nas  1964 NASCAR Catalina Ht. (1/25th scale) $60.00
      (stock complete car with vacuformed glass - except wheels & tires)
      (includes race interior, chassis, and engine)

CAT-64sd   1964 Pontiac Catalina 2dr. Sedan   (1/25th scale)   $60.00
      (stock complete car with vacuformed glass - except tires)
      (mastered from original AMT Grand Prix)

GP-64ht   1964 Pontiac Grand Prix Hardtop (1/25th scale)   $60.00
      (stock complete car with vacuformed glass - except tires)
      (original AMT kit re-cast)

CAT-66ht   1966 Pontiac Catalina 2dr. Hardtop (1/25th scale)   $40.00
      (body, hood, bumpers, grill & tailights, interior, wheels, and vac. glass)
      Use AMT '65 Grand Prix kit for chassis, engine, & tires.  Bonneville kit has longer
      wheelbase chassis and would require shortening.
      (For NASCAR version see INT-11 in Parts Only section)

CAT-66sd   1966 Pontiac Catalina 2dr. Sedan   (1/25th scale)   $40.00
      (body, hood, bumpers, grill & tailights, interior, wheels, and vac. glass)
      Use AMT '65 Grand Prix kit for chassis, engine, & tires.  Bonneville kit has longer
      wheelbase chassis and would require shortening.

STUDEBAKER

LAR-60ht  1960 Lark Ht. (1/25th scale)   $47.00
       (complete car, wheels & tires, & vacuformed glass - no engine)
       (Promo body with hood molded closed; '62 kit chassis and interior)

LAR-60sd  1960 Lark 2dr. Sedan (1/25th scale)   $47.00
        (complete car, wheels & tires, & vacuformed glass - no engine)
        (Promo body with hood molded closed; '62 kit chassis and interior)
       With Fireball Roberts Road Race Decals   $52.00

PARTS ONLY:

ENGINE

ENG-01   1960's Chevy 6-Cylinder (1/25th scale)  $10.00  (Complete)
       Includes early (to '61) and late ('62 & newer) air cleaners.  A generator (up to '62)
       and an alternator ('63 & newer) are both included. Fits Chevy II.  For full-sized
       Chevys & Chevelles, cut off oil pan, turn it around with the sump in the rear.

ENG-02   Mopar Fenderwell Exit Headers  (1/25th scale)  $3.50
      (Early '60's wedge engines - from original JoHan '64 Dodge)

ENG-03   Mopar Hemi Parts (1/25th scale)  $3.50
      (Heads, valve covers, & hood scoop)  
       Converts
Polar Lights '65 Dodge and Lindberg Color-Me-Gone '64 Dodge.

ENG-04   Mopar 4-speed Conversion  (1/25th scale)  $5.50
      (Transmission, floor pedals, & shifter)  To convert Lindberg '64 Dodge kit

ENG-05   Chevelle Rat Motor Headers  (1/25th scale)  $3.50
      (chassis exit - also fits Camaro & Nova)

ENG-06   Chevelle Small Block/409 Headers  (1/25th scale)  $3.50
      (chassis exit - also fits Camaro & Nova)

ENG-07   Ford 221/260/289 Small Block conversion  (1/25th scale)  $10.00
      (No transmission - for use with Revell '64 T-Bolt 427)

ENG-08   '62-'63 Chevy Z-11 Parts  (1/25th scale)  $6.00
      (headers, intake, air cleaner, & front suspension - from AMT '62 Bel Air
        drag kits to convert stock Bel Air or Impalas)

ENG-09   Ford 6-cylinder Engine (1/25th scale)  $10.00
      (from JoHan Maverick kit - for use with various '60's Fords)

ENG-10   Chevy Small Block Street Rod Headers  (1/25th scale)  $3.50
      (over the frame - from Grant King sprint car)

ENG-11   Chevy Small Block Gasser Headers  (1/25th scale)  $3.50
      (over the frame fenderwell exit with dump tubes - '55-'57 Chevy, etc.)

ENG-12   Two '50's NASCAR Air Cleaners  (1/25th scale)  $3.50
      (Dry type air filter & Purolator decals - paint red)

INTERIOR

INT-01   1963 Chev. Impala Z-11 Interior & Hood Scoop (1/25th scale)   $13.00   
       (Z-11's were not SS's w/buckets)  Bench seat with cloth trim, tub with
       console removed and rear seat cloth trim.  Based on Revell kit, will fit AMT
       kit with modifications to chassis - instructions with interior.
     With drag decals - (specify  - Malcom Durham, Butch Leal, Don Nicholson,
       Hayden Proffitt, or Larry Wilson's Sox Sinclair Service)
        (NEW - Wally Bell's New York Shaker or Bachelder's A/FX)
   $21.00
      See ENG-08 (NEW)

INT-02   1964-67 Chevelle NASCAR Interior(1/25th scale)  $13.00
       Includes interior tub, dash, bucket racing seat, & roll cage.

INT-03   '64 Fairlane 500 Bench Seat (1/25th scale)  $3.00
      (for use with Revell T-Bolt stock version)

INT-04   '62 Chevy SS Parts  (1/25th scale)  $6.00
      (AMT '62 Impala SS bucket seats & console, and Lindberg '61 409 headers
        to convert stock bench seat Revell '62 Impala to B/FX drag car)

INT-05   Mopar A990 Bucket Seats (1/25th scale)  $3.00
      (from Lindberg Little Red Wagon - for use with various '60's drag Mopars)

INT-06   '60's Super Stock Rollbar (1/25th scale)  $3.50
      (from Lindberg '64 Dodge  - for use with various '60's drag cars)

INT-07   '64 Dodge 330 Bench Seat (1/25th scale)  $3.00
      (not in reissued Lindberg stock 330 kit - for use with various '60's Mopars)

INT-08   '63 Lightweight Ford Interior (1/25th scale)  $13.00
      (Tub w/correct 500 trim, no console, radio delete dash, and lightweight
        buckets)   For AMT '63 XL Ht. kit
- drag hardtops were not XL's
      1963 Galaxie Drag decals - Ed Martin Ford A/SA; or
        Al Joniec Peanuts S/S; or Tasca Ford S/S - $8.00 ea. car    
        Bridenthal Ford S/S & Little Wed Wat D/S - $10.00 both cars
        Mikey Thompson 997S/S & 644L/P Hemi Ford - $10.00 both cars

INT-09   Convertible Tonneau Cover (1/25th scale)  $3.50
      (1950's NASCAR or customs)

INT-10   Single Rear Loop Rollbar (1/25th scale)  $3.50
      (Mid-1950's NASCAR)

INT-11   1965-66 Full Size GM NASCAR Interior(1/25th scale)  $15.00
       Includes interior tub, st. wheel, dash, bucket racing seat, & roll cage.
      (Fits Monogram/Revell Impalas and AMT Pontiacs)

PARTS

PAR-04   1964 Mercury Comet A/FX Hoods   (1/25th scale)  $7.00
      (one with teardrop scoop and one with twin flat scoops)

PAR-05   Assorted Traction Bars (1/25th scale)  $5.50
      (3 sets Ladder Bars, 3 sets Traction Bars, & 1 set Wheelie Bars)

PAR-06   Assorted Tow Bars & Hitches (1/25th scale)  $5.50 
      (2 Tow Bars, 5 Bumper Hitches, & 1 Under Vehicle Hitch)

PAR-08   Assorted Hood Louvers - 5 pairs  (1/25th scale)  $3.50
      (recessed to mold into hood - '50's & '60's custom and race)

TIRES

TIR-01   Firestone NASCAR Tires (1/25th scale) $6.00
      (early to mid '50's Darlington style) Set of four

TIR-02   Firestone NASCAR Tires (1/25th scale) $6.00
     
(late '50's to mid '60's) Set of four

TIR-03   Goodyear NASCAR Tires (1/25th scale) $6.00
     
(late '50's to mid '60's) Set of four

TIR-05   1960's Narrow White Wall Tires (1/25th scale)  $9.00  
       (Set of four Monogram style with narrow white and black inserts)

TIR-06    M&H Recap Cheater Slicks  (1/25th scale)  $6.00
     
(Pair for early '60's S/S & A/FX cars)
     
(One piece tire with white wall inserts, stock wheels & backings)

TIR-07    M&H Super/Stock Slicks  (1/25th scale)  $6.00
     
(Pair for early '60's S/S cars)
     
(legal two tread groves with stock wheels & backings)

TIR-08    Firestone Drag 500 Pro Stock Tires (1/25th scale)  $6.00
     
(two slicks & two fronts - Goodyear on backside)

TIR-09   M&H A/FX Slicks (1/25th scale)  $5.00
     
(Set of two - mid '60's A/FX & AWB cars. From Revell T-Bolt made
       made to fit regular size 1/25th wheels.)

TIR-10   Wide White Wall Tires (1/25th scale)  $9.00  
       (1950 to 1961 - set of four Monogram style with white inserts)

WHEELS

WH-01   Chevy 6-Lug NASCAR Wheels (1/25th scale) $4.50
      (mid '50's to early '60's) Set of four

WH-02   Holman & Moody NASCAR Wheels (1/25th scale) $4.50
      (late '50's to early '70's) Set of four

WH-03   Pontiac 8-lug Wheels (1/25th scale) $5.50  (1960 to 63 Style)
      
(Four NOT plated, with backs.  Fit new style Monogram & AMT narrow tires.)
  OR Pontiac 8-lug Wheels (1/25th scale) $5.50  Set of four
      
(without trim rings & with separate center caps - for some drag cars)
      (NOT plated, with backs.  Fit new style Monogram & AMT narrow tires.)

WH-04   Cragar Centerline Mag Wheels (1/25th scale) $3.50
      (late '60's & '70's Pro Stock) Set of four

WH-05   Hurst Mag Wheels (1/25th scale) $3.50
      (mid '60's - correct for Hemi Under Glass Cuda) Set of four

WH-06   American Mag Wheels (1/25th scale) $3.50
      Set of four (Specify with or without center dust caps)

WH-07   KeystoneMag Wheels (1/25th scale) $3.50
      (narrow fronts & wide rears - '60's-'70's) Set of four

WH-08   Spun Aluminum Wheel Covers (1/25th scale) $2.50
      ('50's & '60's Street Rods and Drag Cars) Set of four

WH-09   Cragar S/S Mag Wheels (1/25th scale) $3.50
      Set of four

WH-10   Narrow Keystone Mag Wheels (1/25th scale) $3.50
      Set of four

WH-11   Mopar Stock Wheels & Dogdish Hubcaps   (1/25th scale)  $3.50
      (Set of four - from Lindberg '64 Dodge 330 kit)

DECALS ONLY:  (1/25th scale unless specified 1/18th)

    #2 Gaddy's Motor Co. - '56 Chev.  $10.00
      (driven by Gwyn Staley)
    #34 Westmoreland/Alamance Motors - '56 Chev. Conv.   $10.00
      (driven by Gwyn Staley)
    #33 City Motors - '57 Chev. Ht./Conv.   $10.00
    #49 Bob Welborn
- 57 Chevy Conv. (black car)   $10.00
    #27 Gaddy Motors - '59 & '60 Chev.   $10.00
      (driven by Junior Johnson)
    
1962 Nally & Nicholson B/FX Bel Air Ht. - '63 version with door flags
       In 1/18th scale   $12.00  (For personal use only - not to be resold on  
       diecast models.  Limit one per customer.)

   
1962 Hayden Proffitt S/S Bel Air Ht. - replaces AMT kit decals   $8.00
      (Correct partial yellow lettering  & includes missing hood and Hurst decals)
    
1962 Ronnie Sox Thunder in Carolina S/S Bel Air Ht. - all red car  $8.00
    1962 Strickler S/S Bel Air Ht.
       In 1/18th scale   $12.00  (For personal use only - not to be resold on  
       diecast models.  Limit one per customer.)

    1963 Chevy Z-11 1/18th scale  $12.00 Limit two ea. per customer 
           
(For personal use only - not to be resold on diecast models.)
        
(White car by Welly) 
         Specify - Durham-Smythe; Nicholson; Sox; Strickler; or Good Ole Mr. Wilson

    1963 Chevy Z-11 1/18th scale  $12.00 Limit two ea. per customer 
           
(For personal use only - not to be resold on diecast models.)
        
(Black car by Welly) Hayden Proffitt "What if car" (the real car is a Biscayne)
    1964 Jake King Thunderbolt - does either white or lt. blue car  $8.00
       
Also in 1/18th scale (white car only)  $12.00 Limit one per customer 
         
(For personal use only - not to be resold on diecast models.)
    1964 Thunderbolt 1/18th scale (Burgundy car)  $12.00 Limit one ea. per 
         customer
 
(For personal use only - not to be resold on diecast models.)
         Specify - Phil Bonner; Downtown Ford; Butch Leal; Romy Hammes Ford;
         or Tasca Ford

    1984 Gary Duckworth P/S Camaro (driven by Ronnie Sox)   $8.00

PLEASE NOTE:

Check availability before ordering decals - all three of our Alps printers are broken.
Therefore, out-of-stock decals can't be reprinted.  All are while supply lasts.   



Thanks to all modelers for your support!

Paint  |Catalog | New Stuff | Order Form |

Resin |Catalog | New Stuff | Order Form |

Home | E-Mail